Tobe82
Experto
Cambiando el arrancador de un Mercury Truck mountaineer 4.0L v6 vin E
Remove
1. Disconnect the battery ground cable
2. Raise and support the vehicle
3. Remove the starter motor solenoid terminal cover
4. Remove the nuts and disconnect the starter wires
5. Remove the three bolts and the starter motor
Installation
1. To install, reverse the removal procedure
Remove
1. Disconnect the battery ground cable
2. Raise and support the vehicle
3. Remove the starter motor solenoid terminal cover
4. Remove the nuts and disconnect the starter wires
5. Remove the three bolts and the starter motor
Installation
1. To install, reverse the removal procedure