honda civi 94

ocupo ayuda tabla de torque honda civic 94 para vielas bancadas y culata

se te olvido la palabra magica, haber si la encontrais por hay.

Honda Torques de culata, en esta pagina puedes buscar
https://automecanico.com/auto2009/honda4Acil.html

Torques de culata Honda civic, en ese link encuentras para motores Honda 1.6L D16A, D16Z y D16Y entre otros

Informacion adicional para estos motores
ESPECIFICACIONES DE TORQUE Y APRIETE PARA MOTORES HONDA 1.6L
MOTORES D16A, D16Z, D16Y

Engine technical details
Bore................2.95"(75mm)
Stroke.............3.54"(90mm)
Deck Height.....8.347"
Rod Length......5.394"
______Compression______HP___________TQ
D16A6.......9 to 1...........108@6000.......100@5000
D16Z6.......9.2 to 1........125@6600.......106@5200
D16Y8.......9.6 to 1........127@6600.......107@5500

Engine Block Torque Spec's
Connecting Rod Nut........23ft lbs
Crankshaft Pulley Bolt.....119ft lbs (D16A6).....134ft lbs (D16Z6)
Timing Belt Adjuster Bolt.....33ft lbs
Main Bearing Cap Bolt........47ft lbs (D16A6)......Step 1...18ft lbs (D16Z6 and Y8)
Step 2...38ft lbs (D16Z6 and Y8)
Crank (vibration) damper bolt...................119ft lbs
Oil Pan bolts............................................9ft lbs
Oil pick up tube bolts...............................17ft lbs
Oil Pump to engine block bolts/nuts..........9ft lbs
Oil Pump Screen bolts..............................8ft lbs
Oil pump cover Screws.............................5ft lbs
Oil filter Housing Bolts..............................9ft lbs
Water pump pulley bolts...........................9ft lbs
Thermostat housing bolts.........................9ft lbs
Water pump attaching bolts......................9ft lbs

Main Bearings cap bolts
Separate caps and bridge..........................48ft lbs
One piece cap assembly............................33ft lbs

ESPECIFICACIONES DE TORQUE Y APRIETE PARA MOTORES HONDA 1.6L
MOTORES D16A, D16Z, D16Y
Cylinder Head
Cylinder Head Bolt Thread Size and Pitch.....10mm x 1.25mm
Distributor Mount Bolt....17‐18ft lbs
Intake Manifold to Cylinder Head Nut..16ft lbs
Rocker Arm..D16A6
End Rocker Arm Shaft Cap..9ft lbs
All Others and all D16Z and Y8s..........16ft lbs
Throttle Body Nut.......14‐16ft lbs
Camshaft Holder 8mm Bolts.....14‐15ft lbs
Camshaft Holder 6mm Bolts.....104 inch lbs
Camshaft Pulley Bolt.......27ft lbs

AEM Cam Gear Adjustment Bolts (3 of them)....15ft lbs..apply Loctite "red" to the three retaining bolts.
Valve Adjustment Nut....10ft lbs (D16A6)....14‐15ft lbs (D16Z6 and Y8)
Valve cover Bolts...................................7ft lbs

VALVE COVER TORQUE PATTERN
5 1 4 (Intake side of valve cover)

_____3_________ 2______ (Exhaust side of valve cover)

Spark Plugs..........................................13ft lbs
Cam Gear Bolt......................................27ft lbs
Cam Cover Crown Bolts............................7ft lbs
Cylinder Head Studs....................1st step..22ft lbs...2nd..49ft lbs
Exhaust Header Nuts to Cylinder Head.................22ft lbs
Exhaust Header To Down Pipe Nuts......................33ft lbs
Intake Manifold Nuts..............................16ft lbs

Fuel injection service bolts
88‐90.......................................................9ft lbs
91+........................................................11ft lbs
Throttle Body nuts...................................16ft lbs
Fuel Rail nut..............................................9ft lbs

Transmission Torque Spec's
A/T Tranny Drain plug.........................29ft lbs
M/T Tranny Drain and fill plug..............30‐40ft lbs

ESPECIFICACIONES DE TORQUE Y APRIETE PARA MOTORES HONDA 1.6L
MOTORES D16A, D16Z, D16Y
Manual Transmission
Counter shaft lock nuts..............................65ft lbs
End cover bolts.........................................9ft lbs
Selector arm holder bolts...........................9ft lbs
Tranny case to Flywheel housing...............20ft lbs
Tranny to engine bolts
4 speed.................................................33ft lbs
5 speed.................................................50ft lbs
Clutch pressure plate bolts......................19ft lbs

CLUTCH PRESSURE PLATE TORQUE PATTERN
_______1
_____6___3
_____4___5
_______2

Release fork bolts...................................22ft lbs
Drive axle/hub nuts..............................134ft lbs
Drive Plate bolts for A/T.........................54ft lbs
Flywheel Bolts M/T.................................76ft lbs
Flywheel Bolt ARP..................................87ft lbs

FLYWHEEL TORQUE PATTERN
_____1
_____6___8

___4_______3
_____7___5
_______2

Master Cylinder Mounting nuts................11ft lbs

Cylinder Head Spec's
Valve Sizes D16A6 Intake......29mm Exhaust....25mm
D16Z6 and Y8 Intake...30mm Exhaust....26mm

Other Torque Spec's
Wheel Lug Nuts....................................80ft lbs

Fuel Filter
Banjo Bolt..........................................16ft lbs
Service Bolt.........................................9ft lbs
Clamp Bolt...........................................9ft lbs
Brake line to caliper banjo bolts (front/Rear)...25ft lbs
Brake Booster mounting nuts.............................9ft lbs

Valve Clearance
Stock D16A6,D16Z6 and D16Y8 Cams
Intake.....007‐.009" (.17‐.22mm)
Exhaust...009‐.011" (.22‐.27mm)

Head Chamber Volume
D16A6......................38cc
D16Z6 and D16Y7.....34.6cc
D16Y8......................32.8cc

Throttle Body Sizes
D16A6..... 55mm
D16Z6......56mm
D16Y7......56mm
D16Y8..... 56mm